Baby Products Catalogue

Video

STEPS in Photos

1. You Brought Baby Swing Home

2. What Does it Contains??

2 hanger                                    1 body frame                       1 - cloth hammock

4 rubber shoes                    3 - big head screws    4-small head screws

3. Open the body frame.  4. Put metal plate in middle

5.  Use big head screw to tight the plate

6. Use 2 other Big Head Screws to Tight the Corner. 

Make sure 3 screws are tight enough

7. Open the 4 Legs and use 4 small head screws to tight the legs. As show in the picture.

8. Use 4 Rubber Shoes on the legs. This will help to avoid scratch on the floor 

9. Put the hangers on the frame. As show in below picture 

10. Hang the Cloth Hammock in the Hanger. As show in below picture

11. Check all Screws and strength of entire baby swing by putting light pressure on the frame. Make sure everything is tight and ready. Then put baby inside the hammock.

TIPS

Every Week Check the Screws and Bolts are tight. Specially top screw where hammock hangers are hanging 

Always keep thick blanket on the ground which covers Hammock area. just for safer side. If baby comes out from hammock. see the below picture for reference.